IMMUTEX™ is a uniform-sized polystyrene latex (PSL) particle for agglutination tests. A variety of particle sizes and surface chemistries of IMMUTEX™ is available to meet your requirements to control sensitivity and dynamic range.
● Wide choice of particle size from 0.05 µm to 0.48 µm
● Uniform-sized particles
● Variety of surface chemistry
● Ready-to-use, no further purification needed
|Diameter||0.05 µm～0.5 µm|
|Surface Charge Density||～0.4 mmol/g（～150 Å2/COOH）|
|Solid Content||5 or 10%|
|Solution||0.09% sodium azide in water|
● IMMUTEX™ Plain Series (hydrophobic adsorption)
IMMUTEX™ Plain Series is a plain polystyrene latex particle which has no or ultra-low carboxyl groups
on its surface.
This series is suitable for physical adsorption of antibodies or antigens.
● IMMUTEX™ Carboxyl Series (covalent attachment)
IMMUTEX™ Carboxyl Series is a carboxylated polystyrene latex particle suitable for covalent coupling
of antibodies or antigens.
IMMUTEX™ Plain Series is a plain polystyrene latex particle which has no or ultra-low carboxyl groups on its surface. This series is suitable for physical adsorption of antibodies or antigens.
|Code No.||Product||Diameter (µm)||Solids Content (wt%)|
|J-IM-P2015||IMMUTEX™ P2015, Plain, 0.07-0.11 µm||0.07 - 0.11||5|
|J-IM-P2116||IMMUTEX™ P2116, Plain, 0.10-0.14 µm||0.10 - 0.14||10|
|J-IM-P2117||IMMUTEX™ P2117, Plain, 0.10-0.16 µm||0.10 - 0.16||5|
|J-IM-P2118||IMMUTEX™ P2118, Plain, 0.14-0.21 µm||0.14 - 0.21||10|
IMMUTEX™ Carboxyl Series is a carboxylated polystyrene latex particle suitable for covalent coupling of antibodies or antigens.
|J-IM-P0001||IMMUTEX™ P0001, Carboxyl, 0.05-0.09 µm||0.05 - 0.09||0.15 - 0.22||5|
|J-IM-P0011||IMMUTEX™ P0011, Carboxyl, 0.07-0.11 µm||0.07 - 0.11||0.14 - 0.21||5|
|J-IM-P0112||IMMUTEX™ P0112, Carboxyl, 0.12-0.18 µm||0.12 - 0.18||0.08 - 0.12||5|
|J-IM-P0113||IMMUTEX™ P0113, Carboxyl, 0.17-0.23 µm||0.17 - 0.23||0.06 - 0.09||10|
|J-IM-P0307||IMMUTEX™ P0307, Carboxyl, 0.32-0.48 µm||0.32 - 0.48||0.03 - 0.05||10|
*1 Conductometric titration method
The Blockmaster™ series consists of several synthetic water soluble polymer blocking reagents that solve the safety, quality and purity issues often observed when using “standard” protein based blocking solutions.
Blockmaster™ CE510 and CE210 are fully synthetic, water soluble blocking reagents consisting of a hydrophilic PEG tail and multiple amine-end groups. While the PEG tail reduces the non-specific binding, the amine end-group allows for a covalent conjugation with amine reactive surfaces.
|J-CE210RAN||Blockmaster™ CE210||100 mL|
|J-CE510RAN||Blockmaster™ CE510||100 mL|
Blockmaster™ DB1130 is a fully synthetic, water soluble polymer blocking reagent consisting of both hydrophilic and hydrophobic units. The optimized combination of hydrophilic and hydrophobic units strongly reduces the non-specific binding and greatly enhances colloidal stability of latex and magnetic beads.
|J-DB1130||Blockmaster™ DB1130||100 mL|
Blockmaster™ PA1080 is a fully synthetic, water soluble polymer blocking reagent consisting of both hydrophilic and hydrophobic units. The optimized combination of hydrophilic and hydrophobic units realizes excellent protein/cell blocking properties on a wide variety of substrate materials.
|J-PA1080||Blockmaster™ PA1080||100 mL|
IMMUTEX is a trademark of JSR corporation.
Important Cookies information – this message will only appear once