This site is for customers in Asia. Customers in China & other regions, please go to Global page.
HOME > Product category > Immunology > MHC Tetramer staining method
“MHC Tetramer staining methodアイコン"

MHC Tetramer staining method




Human whole blood samples

  • Collect blood by venipuncture into a blood collection tube containing an appropriate anti-coagulant.
  • Add 10 µL of T-Select MHC Tetramer to each 12 x 75 mm test tube.
  • Add 200 µL of whole blood into each test tube.
  • Vortex gently.
  • Incubate for 30-60 minutes at 2-8°C or room temperature (15-25°C) protected from light.
  • Add any additional antibodies (e.g. anti-CD8) and vortex gently.
  • Incubate for 30 minutes at 2-8°C protected from light.
  • Lyse red blood cells using commercially available reagents.
  • Prepare samples according to description of the package insert.
  • Store prepared samples at 2-8°C protected from light for a minimum of 1 hour (maximum 24 hours) prior to analysis by flow cytometry.
Procedure for whole blood samples

* If hemolysis is incomplete, a non-specific staining pattern caused by diffuse reflection from
  erythrocytes may be observed.
  Inclusion of a CD45 antibody can help identify the true lymphocyte population.

Whole blood samples FCM


Human Peripheral Blood Mononuclear Cells (PBMC) samples

  • Prepare peripheral blood mononuclear cells (PBMC) according to established procedures. Cells should be re-suspended at a concentration of 2 x 107 cells/mL. 50 µL of sample is required for each T-Select MHC Tetramer determination.
  • Add 10 µL of Clear Back (human FcR blocking reagent, Code No. MTG-001) to each 12 x 75 mm test tube.
  • Add 50 µL PBMC into each test tube (e.g. 1 x 106 cells per tube).
  • Incubate for 5 minutes at room temperature.
  • Add 10 µL of T-Select MHC Tetramer and vortex gently.
  • Incubate for 30-60 minutes at 2-8°C or room temperature (15-25°C) protected from light.
  • Add any additional antibodies (e.g. anti-CD8) and vortex gently.
  • Incubate for 30 minutes at 2-8°C protected from light.
  • Add 3 mL of PBS or FCM buffer (2% FCS/0.09% NaN3/PBS).
  • Centrifuge tubes at 400 x g for 5 minutes.
  • Aspirate or decant the supernatant.
  • Resuspend the pellet in 500 µL of PBS with 0.5% formaldehyde.
  • Store prepared samples at 2-8°C protected from light for a minimum of 1 hour (maximum 24 hours) prior to analysis by flow cytometry.

Mouse spleen samples

  • Collect lymph node, spleen or thymus and prepare a single-cell suspension according to an established protocol. Cells should be re-suspended at a concentration of 2 x 107 cells/mL. 50 µL of sample is required for each T-Select MHC Tetramer determination.
  • To each 12 x 75 mm test tube add 10 µL of Clear Back (human FcR blocking reagent, Code No. MTG-001).
  • Add 50 µL cell suspension into each test tube (e.g. 1 x 106 cells per tube).
  • Incubate for 5 minutes at room temperature.
  • Add 10 µL of T-Select MHC Tetramer and vortex gently.
  • Incubate for 30-60 minutes at 2-8°C protected from light.
  • Add any additional antibodies (e.g. anti-CD8) and vortex gently.
  • Incubate for 30 minutes at 2-8°C protected from light.
    If red blood cell lysis is necessary, proceed to step 8-16 in the Procedure for Whole Blood section. If red blood cell lysis is not necessary, continue to step 9 below.
  • Add 3 mL of PBS or FCM buffer (2% FCS/0.09% NaN3/PBS).
  • Centrifuge tubes at 400 x g for 5 minutes.
  • Aspirate or decant the supernatant.
  • Resuspend the pellet in 500 µL of PBS with 0.5% paraformaldehyde or formalin.
  • Store at 4°C protected from light for a minimum of 1 hour (maximum 24 hours) prior to analysis by flow cytometry.

Staining differences among CD8 antibody clones

Human CD8 antibody clones

Staining of CD8 PBMC separated from peripheral blood of HLA-A*24:02 positive healthy subjects were simultaneously stained with HLA-A*24:02 EBV BRLF1 Tetramer-PE (Code No. TS-M002-1) or HLA-A*24:02 Negative Tetramer-PE (Code No. TS-M007-1) with three different human CD8 antibody clones: T8, SK1, and B9.11. A distinct population of specific CTL was better resolved when clone T8 was used compared to the other two clones.

Reference:
Rita C et al. Int. Immunol. 14, 39−44 (2002)


Mouse CD8 antibody clones


 Effect of CD8 antibody clones on H-2Kb OVA Tetramer staining: "Cells from OT-I mice"

Splenocytes from mice transgenic for OVA-specific T cells (OT-I) were used to explore staining differences among mouse CD8 antibody clones in combination with H-2Kb Tetramers. OT-I mouse spleen cells (1 × 106 cells/sample) were stained with H-2Kb OVA Tetramer-PE (10 µL/sample) and serially diluted anti-mouse CD8 (clone KT15 or clone 53.6.7) antibody in a final assay volume of 100 µL. H-2Kb β-galactosidase (β-gal) Tetramer-PE (10 µL/sample) was used as a negative tetramer to assess non-specific binding. When anti-CD8 clone 53.6.7 was used, positive staining was observed on CD8 positive cells with both OVA Tetramer and β-gal Tetramer. Even when 53.6.7 was diluted, the cells were stained with both tetramers similarly, suggesting the tetramer staining was not specific.
When anti-CD8 clone KT15 was used, however, CD8 positive cells among OT-I mouse spleen cells were specifically stained only with OVA Tetramer at all antibody concentrations tested. Cells stained with β-gal Tetramer were negative. Titration of KT15 revealed an optimal signal to noise ratio at 0.63 µL/sample for OT-I splenocytes. In summary, when staining cells with H-2Kb tetramers it is important to use appropriately titrated anti-CD8 clone KT15 and include a negative control tetramer in the experiment.


H-2Kb OVA Tetramer staining 1
クリックで拡大できます。



 Effect of CD8 antibody clones on H-2Kb OVA Tetramer staining:
"Cells from peptide-immunized mice"

Mouse spleen cells prepared using peptide immunization for OVA-specific CTL induction were stained with H-2Kb OVA Tetramer-PE (10 µL/sample) and anti-mouse CD8 (clone KT15 or clone 53.6.7) H-2Kb β-galactosidase Tetramer-PE (10 µL/sample) was used as a negative tetramer to assess non-specific. When KT15 was used, OVA-specific tetramer positive cells were observed compared with the negative tetramer, while when 53.6.7 was used, marked non-specific staining was observed in both H-2Kb β-galactosidase Tetramer samples clone 53.6.7 is known to have poor compatibility with OVA and other H-2Kb Tetramers. MBL recommends the use of KT15 for murine CD8 staining.

H-2Kb OVA Tetramer staining 2